IT俱乐部-城北日常经验分享

浏览: 32698    评论: 0

WIN7系统 开机时出现”Secure Boot Violation”错误进不到系统BIOS解决方法

Secure Boot Violation

The sysytem found unauthorized changes on the firmware,operating sysytem or UEFI drivers

Press [OK] to run the next boot device,orenter directly to BIOS Setup if there are no orher boot devices installed.

Go to BIOS Setup > Advanced > Boot and change the current boot device into other secured boot devices.

OK




有部分使用华硕电脑的用户重装Win7系统,在开机的时候,遇到Secure Boot Violation(安全引导冲突)出现下面提示

Secure Boot Violation

The sysytem found unauthorized changes on the firmware,operating sysytem or UEFI drivers

Press [OK] to run the next boot device,orenter directly to BIOS Setup if there are no orher boot devices installed.

Go to BIOS Setup > Advanced > Boot and change the current boot device into other secured boot devices.

OK



不知道怎么解决。这篇文章是本站给大家带来的解决重装系统Win7提示Secure Boot Violation问题方法教程。

若是开机时出现"Secure Boot Violation"讯息时,导致无法进入系统

WIN7系统 开机时出现”Secure Boot Violation”错误进不到系统BIOS解决方法

 

为了保护用户的系统免受恶意攻击,华硕计算机实现微软的安全启动功能并默认开启。此功能执行一个合法的装载程序检查并引导操作系统。

由于Windows 7不支持安全启动(https://technet.microsoft.com/en-us/library/hh824987.aspx), 在升级 KB3133977之后,该系统可能检测到不一致的作业系统加载密钥,导致启动失败。

若是Windows 8/10的计算机,也有可能因为自行安装的操作系统或更改系统设定等等原因导致检测到不一致的加载密钥,导致启动失败。

请按照下面列出的步骤更改BIOS设定中的安全启动设置,这将允许系统成功启动并进入操作系统。

 

请先进入BIOS设置画面。在未开机情况,按住[F2]键 (或[Del]键)不放,然后按下[电源键]开机,直到BIOS设置画面出现后即可放开[F2]键(或[Del]键)。
WIN7系统 开机时出现”Secure Boot Violation”错误进不到系统BIOS解决方法

进入BIOS设置画面后,您可以透过键盘上的箭头键和Enter键或鼠标进行选择及确认。
WIN7系统 开机时出现”Secure Boot Violation”错误进不到系统BIOS解决方法

进入[Boot]页面①,然后选择[Secure Boot]项目②。

选择[OS Type]项目③,然后设定为[Other OS]④即可关闭安全启动功能。
※ 注: 设定为Windows UEFI mode即为开启安全启动功能。

储存设置并离开。单击键盘上的[F10]键,然后点选[Ok]⑤,计算机将会重新启动并进入操作系统。

 

若您的问题并未解决,请联系ASUS客服中心,取得进一步的信息。


全文详见:http://it-club.cn/post/698.html

TOP

评论列表


发表评论
来宾的头像

TOP

网站分类

TOP

站点信息

  • 文章总数:736
  • 页面总数:1
  • 分类总数:3
  • 标签总数:24
  • 评论总数:270
  • 浏览总数:9851057